How big can a horizontal bale press be?

Release time: 2021-12-24   sentiment:1033 time

Good equipment is maintained, and bad equipment is caused by your carelessness. The machines in the market are really dazzling. It is impossible to distinguish between the good and the bad. It can only be done in a test machine. see,
But the new machine is generally invisible. When you buy the waste paper box baler, after a long time of use and washing, you can discover the mystery. Good equipment is presented to everyone by maintenance. The bad machine is the problem caused by you not taking care of it properly.


Before opening the waste paper box baler, check the machine bearings, hydraulic cylinders, fuel tanks, and conveyor belts for any garbage left over from yesterday's work, and then check if there is any open space around, so that you will not be rushed during the Baler. To vacate the ground to find a place for the compressed material block, let's see if there are any matters needing attention before starting the machine, check whether the parts of the strapping machine are in good condition, and look at the screws and nuts of each part If there are signs of loosening, and then there is such a situation, please ask the master to fasten it quickly. If there is a shortage of nails and caps, they can be filled in time. This equipment will not only make your profits return, but also will make your factory more profitable.
NKBALER recommends that you do a good job of daily maintenance and maintenance of the hydraulic baler, which can effectively extend the service life of the hydraulic baler and create greater profits for you.