PET Bottle Baling Press Machine
Release time: 2023-10-20 sentiment:169 time
The main working principle of the PET Bottle Baling Press Machine is to put the PET plastic bottles into the machine and compress them into blocks through high temperature and high pressure, making it more convenient for transportation and disposal. This machine is usually very user-friendly, easy to operate, efficient, and can greatly improve the recycling rate of PET plastic bottles.
The main components of the PET Bottle Baling Press Machine include a compression cylinder, a hydraulic system, an electrical control system, etc. The compression cylinder is the core part of the equipment, responsible for compressing the PET plastic bottles; the hydraulic system provides power to drive the compression cylinder; and the electrical control system controls the operating state of the equipment to ensure its normal operation.
The use of the PET Bottle Baling Press Machine not only improves the recycling rate of PET plastic bottles but also saves space and reduces transportation costs. In addition, as the compressed PET plastic bottle blocks can be directly used as fuel, this machine also has energy recovery functions.
The PET Bottle Baling Press Machine is an efficient and environmentally friendly device that plays an important role in promoting the recycling of PET plastic bottles and protecting the environment.
NKW200Q
Item |
Name |
parameter |
mainframe parameter |
Bale size |
1100mm(W)×1100mm(H)×~1800mm(L) |
Material type |
Scrap Kraft paper, Newspaper, Cardboard ,Soft Film, Plastic, |
|
Material density |
650~750Kg/m3(Moistures 12-18%) |
|
Feed opening size |
2400mm×1100mm |
|
Main motor power |
37KW×2sets+15KW |
|
Main cylinder |
YG300/230-2900 |
|
Main cylinder force |
200T |
|
Capacity |
28-30Ton/hour |
|
Max. system working force |
30.5MPa |
|
Mainframe weight(T) |
About 30 tons |
|
Oil tank |
2m3 |
|
Mainframe size |
About 11×4.3×5.8M(L×W×H) |
|
Tie wire line |
4 line φ3.0-3.2mm3 iron wire |
|
Pressure time |
≤30S/ (go and back for empty load) |
|
Chain conveyor technology |
Model |
NK-III |
Conveyor weight |
About 7 tons |
|
Conveyor size |
2000*14000MM |
|
terra hole size |
7.303M(L)×3.3M(W)×1.2M(deep) |
|
Conveyor motor |
7.5KW |
|
Cool tower |
Cool tower motor |
0.75KW(water Pump)+0.25(Fan) |